MEDI-KOOL SALINE SS (Micro & Saline Depth)
This unit was developed specifically to store saline for the induced Hypothermia Protocol. As of 2015 these units cannot operate in a “Cool only” style. The MK SALINE is now temperature controlled as all the others.
This unit comes with two different depth options
(see measurements below)
Compressor can be mounted to the rear , right, left or top of the unit.
Door can be hinged top or bottom.
All Medi-Kool units come with our standard lock & key.
Each unit can range in temperature from 32°F – 110°F with our standard control board.
MEDI-KOOL SALINE SS SPECIFICATIONS
RUNNING AMPERAGE
| Startup = 10 amps |
| Running = 5.8 amps |
DIMENSIONS
| MK SALINE / MICRO DEPTH Internal: 10″ Wide x 9 7/8″ Deep x 5 3/4″ High Cutout Dimensions : 14.525″ Wide x 12.625″ Deep x 10.15″ High |
| MK SALINE / SALINE DEPTH Internal: 10″ Wide x 15 7/8″ Deep x 5 3/4″ High Cutout Dimensions : 14.525″ Wide x 18.625″ Deep x 10.15″ High |
Dimensions above do not include compressor
Compressor Dimensions:
13″ Wide x 7″ Deep x 7 1/2″ High
Please be sure to include compressor dimensions when measuring for install.
Important Information
All units come with a 1.25″ Flange surrounding the cabinet. This flange is NOT included in the Cutout Dimensions.
Please cut the hole according to the Cutout Dimensions, and remember a 1.25″ Flange surrounds the entire cabinet to mount cabinet into the wall.
DOCUMENTATION
Download any of these documents by clicking on the link!
